Shed_Fence_Protector_Product_Ebony.jpg Shed_Fence_Protector_Ebony_Swatch.jpg Shed_Fence_Ebony_Ebony.jpg Shed_Fence_Ebony_Shed.jpg Shed_Fence_Protector_Product_Golden_Honey.jpg Shed_Fence_Protector_Golden_Honey_Swatch.jpg Shed_Fence_Golden_Honey_Fence.jpg Shed_Fence_Golden_Honey_Shed.jpg Shed_Fence_Protector_Product_Juniper_Green.jpg Shed_Fence_Protector_Juniper_Green_Swatch.jpg Shed_Fence_Juniper_Green_Fence.jpg Shed_Fence_Juniper_Green_Shed.jpg Shed_Fence_Protector_Product_Nutmeg.jpg Shed_Fence_Protector_Nutmeg_Swatch.jpg Shed_Fence_Nutmeg_Fence.jpg Shed_Fence_Nutmeg_Shed.jpg Shed_Fence_Protector_Product_Spiced_Cedar.jpg Shed_Fence_Protector_Spiced_Cedar_Swatch.jpg Shed_Fence_Spiced-Cedar_Fence.jpg Shed_Fence_Spiced_Cedar_Shed.jpg Shed_Fence_Protector_Product_Walnut.jpg Shed_Fence_Protector_Walnut_Swatch.jpg Shed_Fence_Walnut_Fence.jpg Shed_Fence_Walnut_Shed.jpg
Sheds & Garden Buildings

Shed & Fence Protector

£27.49

Ideal for large areas of rough sawn wood such as fences and sheds, this one coat system nourishes the wood with a blend of natural oils and waxes, depositing UV absorbing pigments to enhance, brighten and leave a long lasting finish.

Colour Range*

*Please note actual colours may vary from images shown. This is due to the differences in monitor and mobile screens displaying colour differently. We cannot guarantee that the colour you see accurately displays the true colour of the end treated product and always recommend testing on an inconspicuous area before beginning your project.

Select Size:

How much will I need? Try our coverage calculator

Or

  • The breathable stain helps to seal the wooden surface to leave a hydrophobic, breathable coating that will not crack, flake, peel or blister.
  • One coat is enough for the coating to regulate moisture, reducing swelling and shrinkage, and leave a highly water resistant coating.
  • Formulated for easy use, the product clings to the brush, reducing dripping on surrounding areas.
  • Water -based alternative to traditional solvent based stains with only trace VOC content-without sacrificing quality.
Directions for Use

Surface Preparation

Shake / mix well before use and frequently during application (thorough mixing is needed to ensure a consistent colour throughout the treatment).


New Bare Timber: Ensure the surface is clean, dry and free from contamination.


Previously Coated Timber: Remove any old loose or peeling coatings and sand back, ensuring any dust is removed. This will reduce the risk of problems such as patchiness or uneven drying. Wear a dust mask during sanding. Surfaces already coated with a wood stain such as Timbashield Wood Protector or Timbashield Shed and Fence Protector should be allowed to naturally weather for a year and do not need the additional sanding step and just need to be thoroughly cleaned before reapplication.


Old Timber: Wood that has decayed or is damaged should be removed and replaced. Brush with a stiff brush to remove any dirt that has become ingrained. Mould, algae and fungi must be removed and treated with a suitable wood cleaner.


Please note that the due to the differences in porosity of some wooden surfaces, rough sawn, absorbent wood will have a darker finish than harder smooth wood. This is due to how much product is absorbed. A test patch is always recommended.


Application

Apply the product onto dry wood when there is no imminent rain forecast and in temperatures above 5 degrees. Do not apply in damp or humid conditions. Failure to meet these requirements may adversely affect the drying and durability of the finish.

Ensure surrounding areas are protected during application.


Brush: Always use a good quality brush that is recommended for use on the surface type to be treated. Saturate the brush and apply evenly in the direction of the wood grain, brushing out thoroughly. Allow the product to penetrate the wood and leave to dry. Under normal conditions this should take 4-6 hours, but it will be shower proof within an hour. Whilst this is a one coat system, if after the wood is completely dry bare patches are observed, repeat the treatment.


Roller: A roller may be used on smooth wood, but on rough sawn timber this may result in snagging, in which instance applying with a brush is recommended.


Spray: Always refer to the sprayer user guide for full instructions before use. Stir thoroughly before pouring the contents into your chosen sprayer. Cover any nearby surfaces in case of overspray. Spray evenly in the direction of the wood grain. 


Low temperatures, increased humidity and ingredients of some wood types may increase drying time.


Cleaning

During application, remove any excess with a clean cloth. Any spillages should be cleaned up immediately and brushes washed with soap and water.


Storage and Shelf Life

The product should be stored in frost- free conditions. Recommended shelf life is 12 months from date of manufacture. If you wish to use the product after this time, stir well and trial before use.

Delivery & Shipping

Mainland UK

STANDARD DELIVERY (2-3 WORKING DAYS)

 

£6.95 or FREE on orders over £25

 

NEXT DAY DELIVERY - £8.95

 

For delivery information visit our Delivery and Returns Page

Product Details & Features

Low odour, non flammable and contains only trace levels of VOCs.

Protection from just one coat.

A water based wood stain specifically designed for use on exterior wood such as sheds and fences.

Extends the lifespan of the wood by adding a film that is resistant to fungal growth.

Note: The finished surface is influenced by several factors including wood species, previous treatments that may have been used, and the condition of the wood, therefore a trial application is always required.

Waterproofing Technology

Timbashield Shed and Fence Protector combines natural oils and waxes with core shell technology to give premium wood protection for exterior wood.
Penetrates deeply into the wood, sealing and protecting from within.

Product Coverage Calculator

Unsure how much product you’ll need to complete your project? Use our handy coverage calculator and we’ll give you an estimated coverage amount.

Additional Information

Safety Data Sheet

Type: PDF
Name: Timbashield - Shed and Fence Protector - Ebony
Date: 06-02-2023
File: Download Sheet

Type: PDF
Name: Timbashield - Shed and Fence Protector - Golden Honey
Date: 06-02-2023
File: Download Sheet

Type: PDF
Name: Timbashield - Shed and Fence Protector - Juniper Green
Date: 06-02-2023
File: Download Sheet

Type: PDF
Name: Timbashield - Shed and Fence Protector - Nutmeg
Date: 06-02-2023
File: Download Sheet

Type: PDF
Name: Timbashield - Shed and Fence Protector - Spiced Cedar
Date: 06-02-2023
File: Download Sheet

Type: PDF
Name: Timbashield - Shed and Fence Protector - Walnut
Date: 06-02-2023
File: Download Sheet

Technical Specification

Product Type: Water Based Shed and Fence Stain

Base: Water-Based

Usage: Most exterior wood

Application: Brush and Roller

Dry time: Completely dry in 24 hours

Number of coats: 1

Colour: Ebony, Golden Honey, Juniper Green, Nutmeg, Spiced Cedar, Walnut

VOC level: Trace

Health & Safety Information

EUH208 Contains 2-OCTYL-2H-ISOTHIAZOL-3-ONE, reaction mass of: 5-chloro-2-methyl-4-isothiazolin-3-one [EC no. 247-500- 7]and 2-methyl-2H-isothiazol-3-one [EC no. 220-239-6] (3:1). May produce an allergic reaction. Harmful to aquatic life with long lasting effects. Keep out of reach of children. If medical advice is needed, have product container or label at hand. Avoid release to the environment. Dispose of contents/ container in accordance with national regulations.

FAQS

Can I use Timbashield Shed and Fence Protector on a smooth planed fence?

Yes, this product can be used on both rough and smooth wood.


Can I add further coats if the colour is not dark enough?

Yes. Due to the hydrophobic nature of the stain, the first coat may begin to repel the second. It is sometimes easier to leave the surface to weather slightly for a few weeks and retry, or alternatively work the brush back and forth to push the coating into the base layer. Any repellence is a good sign that the product is working.


Can I put this on a fence that has previously been treated with a solvent wood stain?

Yes, as long as the stain has weathered for at least a year to allow Timbashield Shed and Fence Protector to soak in.


Can I lighten my dark fence with a lighter stain?

No, even a light stain, when applied to a dark base, will deposit more colour and give a darker finish.